News
Sprayer tank fitting leaking? Bulkheads, bolted...
A drip at the tank outlet is usually a gasket on the wrong side of the wall, a poly bulkhead cranked down too far, or a flange clamp off its...
Sprayer tank fitting leaking? Bulkheads, bolted...
A drip at the tank outlet is usually a gasket on the wrong side of the wall, a poly bulkhead cranked down too far, or a flange clamp off its...
Hose keeps blowing off the barb or weeping at t...
A hose that pops off or drips at the barb is usually the wrong barb for the hose ID, a clamp in the wrong place, or a fitting that is...
Hose keeps blowing off the barb or weeping at t...
A hose that pops off or drips at the barb is usually the wrong barb for the hose ID, a clamp in the wrong place, or a fitting that is...
Boom section won't shut off or won't open? How ...
A section that sprays after shut-off or never comes on is usually no voltage at the plug, a dead actuator motor, or a worn seat. Here is how to check...
Boom section won't shut off or won't open? How ...
A section that sprays after shut-off or never comes on is usually no voltage at the plug, a dead actuator motor, or a worn seat. Here is how to check...
Nozzle bodies dripping after the boom shuts off...
Tips that keep dribbling after the section closes usually mean a cut or swollen check valve diaphragm, a loose end cap, or a cracked body. Here is how to tell...
Nozzle bodies dripping after the boom shuts off...
Tips that keep dribbling after the section closes usually mean a cut or swollen check valve diaphragm, a loose end cap, or a cracked body. Here is how to tell...
Intermittent sensor or valve fault on a Raven s...
A Raven valve, flow meter or pressure sensor that cuts in and out with vibration or rain is almost always a Deutsch DT connector: a backed-out contact, a spread socket...
Intermittent sensor or valve fault on a Raven s...
A Raven valve, flow meter or pressure sensor that cuts in and out with vibration or rain is almost always a Deutsch DT connector: a backed-out contact, a spread socket...
Camlock fitting leaking or won't lock? Gasket m...
A cam lever coupling that weeps or will not latch is usually the gasket. Here is how to tell gasket from worn arms or a mismatched pair, which rubber to...
Camlock fitting leaking or won't lock? Gasket m...
A cam lever coupling that weeps or will not latch is usually the gasket. Here is how to tell gasket from worn arms or a mismatched pair, which rubber to...