Bourgault 3545 ParaLink Hoe Drill
Bourgault drills and air carts › 3545 hoe drill
The 3545 is Bourgault's widest ParaLink hoe drill: 80 to 100 ft on a seven-section frame that still folds conventionally. It carries the same openers and depth systems as the 3335, with Hi-Flotation running gear as standard.
Who it suits
- Large acreages where one drill has to cover the whole farm in a short window.
- Operations that want that width without an unusual folding system to maintain.
- Heavy residue: the frame's wider rank spacing gives trash more room to clear.
Sizes and transport dimensions
| Size | Working width, 10 / 12 in. | Transport width | Transport height | Approx. weight |
|---|---|---|---|---|
| 80 ft | 80 ft / 80 ft | 24 ft 8 in. | 17 ft 10 in. | 68,000 lb |
| 100 ft | 100 ft / 100 ft | 25 ft 6 in. | 19 ft 10 in. | 73,700 lb |
Bourgault estimates for base units on 12 in. spacing without mid row banders, including the standard Hi-Flotation running gear. Transport height is for SE drills. Bourgault's sheet also lists a size between these two, at about 84 ft; ask us about it.

SE or QDA, and four openers
Like the 3335, the 3545 comes as the fixed-frame SE, with depth set at each opener, or the QDA, which sets depth at the frame with cylinders and shims and can take AccuSet2 for on-the-go changes from the cab. It takes the same four openers: PLS (QDA only), PLDS, PLX and PLDX.
The opener comparison is on the 3335 page.

What it asks of the tractor
Hydraulic demand peaks in headland turns, when the openers lift and lower. Openers take priority over the fans, so at the minimum figure fan speed can drop by a fifth or more while turning.
| Row spacing | Without mid row banders | With mid row banders |
|---|---|---|
| 10 in. | 15 gpm min, 22 recommended | 20 gpm min, 25 recommended |
| 12 in. | 13 gpm min, 18 recommended | 22 gpm min, 25 recommended |
- Use ¾ in. couplers on tractor and drill. A ½ in. coupler is only good for about 12 gpm.
- A tractor with twin-flow pumps can run the fans on one pump and the drill on the other.
- The air cart's fans need their own flow on top of this. See the 9000 I Series page.
- Bourgault does not publish a horsepower figure. Tell us your tractor and we will tell you whether it will pull one.
Common options
- Mid row fertilizer: MRB III, MRB ID or the MRS III shank.
- TriMax triple shoot, available on every 3545.
- PackMaster automatic packing pressure and LiftMaster headland lift.
- Rear drop hitch for a liquid or NH3 tank.
Parts for a 3545
The Bourgault parts finder has the drawings. Enter your serial number, tap the part on the drawing and send us your list.
Pricing a 3545
Spray Center Electronics in Spokane is a Bourgault dealer. Tell us your acres, tractor and the cart you have or want, and we will put a configuration and a number together.
Common questions
How wide is the Bourgault 3545?
Working widths run from 80 to 100 ft on 10 or 12 in. row spacing, on a seven-section frame.
How wide is a 3545 in transport?
About 24 ft 8 in. wide and 17 ft 10 in. high for the 80 ft drill, and 25 ft 6 in. wide and 19 ft 10 in. high for the 100 ft. Heights are for SE drills; a QDA varies slightly with its depth setting.
What does a 3545 weigh?
Bourgault estimates about 68,000 lb for the 80 ft and 73,700 lb for the 100 ft, as base units on 12 in. spacing without mid row banders. Hi-Flotation running gear is included in those figures.
What is the difference between the 3545 and the 3335?
Width and frame. The 3335 covers 30 to 86 ft on three or five frame sections. The 3545 covers 80 to 100 ft on seven sections with wider rank spacing, and Hi-Flotation is standard. Openers and depth systems are shared.
Where can I find parts for a 3545?
Use our Bourgault parts finder. Pick your drill, enter the serial number and width, and open the drawing you need.
Specifications are from Bourgault's published specification pages as of November 2026 and can change by model year. Call us to confirm before you plan around a number.