Bourgault 5810 Air Hoe Drill
Bourgault drills and air carts › 5810 air hoe drill
The 5810 is Bourgault's conventional air hoe drill: a floating-hitch frame with spring-trip shanks, single-point depth control and a wide choice of packers. It is the simple option in the lineup, and with the right trips it does tillage work as well.
Who it suits
- Growers who want a straightforward drill with few grease points and little to adjust.
- Farms that still do some tillage and want one frame for both jobs.
- Anyone who likes to change openers: knives, spoons, spread tips and sweeps all go on quick-change adapters.
Not sure a hoe drill is right for your ground? Read coulter drill vs. hoe drill first.
Sizes and transport dimensions
| Model | Frame sections | Working width, 9.8 / 12.6 in. | Transport width | Transport height | Weight, 9.8 / 12.6 in. |
|---|---|---|---|---|---|
| 5810-32 | 3 | 32 ft 8 in. / 33 ft 7 in. | 22 ft 3 in. | 12 ft 8 in. | 22,500 / 21,600 lb |
| 5810-42 | 3 | 42 ft 6 in. / 42 ft | 22 ft 3 in. | 17 ft 6 in. | 25,000 / 23,500 lb |
| 5810-52 | 5 | 52 ft 3 in. / 54 ft 7 in. | 23 ft 8 in. | 16 ft 1 in. | 32,000 / 30,500 lb |
| 5810-62 | 5 | 62 ft 1 in. / 63 ft | 24 ft | 17 ft 11 in. | 35,700 / 34,400 lb |
| 5810-72 | 5 working, 7 folded | 71 ft 10 in. / 73 ft 6 in. | 23 ft 5 in. | 18 ft 11 in. | 43,300 / 40,600 lb |
Weights are Bourgault estimates without mid row banders. Banders add roughly 2,000 to 5,500 lb depending on size and spacing.

Frame, trips and depth

- Frame ranks are 4 x 4 in. tube sandwiched between continuous top and bottom members.
- Depth is set from one point through a master/slave hydraulic system, with a lock valve that holds working depth.
- 330 lb trips use a 1 x 2 in. shank. 450 lb heavy-duty trips use a tapered 1¼ x 2 in. shank.
- Pivots run on replaceable bushings and do not need grease.
- Stone kickers, a rear tow hitch, transport locks and lights are standard.
Openers and packers

- Openers: quick-change knives for low disturbance, spoons for more fertilizer with the seed, spread tips, sweeps and others. Third-party single- and double-shoot boots fit too.
- Packers: steel in 2¼, 3½ or 4½ in., rubber in 3 or 4 in., or 5½ in. pneumatic.
- Replacement tips and openers: see Bourgault Tillage.
What it asks of the tractor
| Row spacing | Without mid row banders | With mid row banders |
|---|---|---|
| 10 in. | 15 gpm min, 22 recommended | 20 gpm min, 25 recommended |
| 12 in. | 13 gpm min, 18 recommended | 22 gpm min, 25 recommended |
- Use ¾ in. couplers. A ½ in. coupler is only good for about 12 gpm.
- Bourgault does not publish a horsepower figure. Tell us your tractor and we will tell you what width it will handle.
Warranty
The drill carries a five-year limited warranty. Shanks are covered for replacement for five years and at 50 percent for life after that.
Parts for a 5810
The Bourgault parts finder has the drawings. Enter your serial number, tap the part on the drawing and send us your list.
Pricing a 5810
Spray Center Electronics in Spokane is a Bourgault dealer. Tell us your acres, tractor and the cart you have or want, and we will put a configuration and a number together.
Common questions
What sizes does the Bourgault 5810 come in?
Bourgault's specification sheet lists five: the 5810-32, 42, 52, 62 and 72. Working width is close to the model number in feet and varies a little with shank spacing.
What shank spacing does the 5810 use?
9.8 in. or 12.6 in.
Should I get the 330 lb or 450 lb trips?
The 330 lb trip suits seeding in most conditions with smaller openers and tillage in lighter soils. The 450 lb heavy-duty trip is the choice for heavy soils, heavy tillage and double-shoot openers, which pull harder.
How is the 5810 different from a ParaLink hoe drill?
The 5810 is a floating-hitch drill with spring-trip shanks, and depth is set for the whole frame from one point. A ParaLink drill such as the 3335 has independent openers that each follow the ground. The 5810 is simpler and can double as a tillage tool.
Where can I find parts for a 5810?
Use our Bourgault parts finder. Pick the 5810, enter your serial number and width, and open the drawing you need.
Specifications are from Bourgault's published specification pages as of November 2026 and can change by model year. Call us to confirm before you plan around a number.