Ace Pumps
FMCSC-650FS-HYD-CD — Pump, Hydraulic, 220x200 Flange, 316 Stainless
FMCSC-650FS-HYD-CD — Pump, Hydraulic, 220x200 Flange, 316 Stainless
Questions on fitment? Need a different size or quantity?
Request a quote or ask about this part by email
FMCSC-650FS-HYD-CD hydraulic-driven centrifugal pump, 220 x 200 flange ports, stainless steel construction, silicon carbide mechanical seal (severe duty). Flow rate up to 170 GPM at 160 PSI. For agricultural spraying and liquid transfer applications.
Build options on this model: case-drain hydraulic motor. Where the list shows standard and optional versions of a part, order the one that matches these options.
Service Parts
| Ref. | Part No. | Description | Qty |
|---|---|---|---|
| 1 | BAC-53 | Pipe plug, 1/8" NPT, hex head | 3 |
| 1 | 41120 | Pipe plug, 1/8" NPT, hex head, stainless steel (optional) | 3 |
| 2 | BAC-12-650-FLG-SS | Volute, NPT & 220 x NPT & 200, 316 stainless steel (FS model) | 1 |
| 3 | 40930 | Cap screw, 3/8" NC x 3/4" hex head, stainless steel | 1 |
| 4 | 30029 | Washer, 3/8" O.D., sealing, stainless steel | 1 |
| 5 | BAC-26-650 | Impeller, cast iron, e-coated | 1 |
| 5 | BAC-26-650-SS | Impeller, stainless steel (optional) | 1 |
| 6 | BAC-7SC-650 | Seal, silicon carbide/Viton, 3/4" | 1 |
| 7 | BAC-4-150 | O-ring, volute seal | 1 |
| 8 | BAC-14-650-HYD | Mounting frame, cast iron, e-coated | 1 |
| 8 | BAC-14-650-HYD-LIN | Mounting frame, cast iron, e-coated, for liner (FS model) | 1 |
| 8a | BAC-16-650-LIN | Liner, 316 stainless steel (FS model) | 1 |
| 9 | 40950 | Cap screw, 3/8" NC x 3/4" hex head | 8 |
| 9 | 40930 | Cap screw, 3/8" NC x 3/4" hex head, stainless steel (optional) | 8 |
| 10 | BAC-54-650 | Slinger, 1.5" OD x 7/8" ID | 1 |
| 11 | 41943 | Snap ring, internal, mounting frame | 2 |
| 12 | 40875 | Bearing, FMC-650 models | 2 |
| 13 | BAC-6-650-HYD-SS | Shaft, 1.13" dia., 11T female spline, stainless steel | 1 |
| 14 | 41085 | Key, .188 x .188 x .875, FMC-650 models | 1 |
Hydraulic Motor
| Ref. | Part No. | Description | Qty |
|---|---|---|---|
| 15 | 43419 | O-ring, flange, M Series (effective 6/15) | 1 |
| 16 | 43414 | Pad, absorbent, M Series (effective 6/15) | 1 |
| 17 | BAC-75-HYD-M16 | Motor, hydraulic, pressure plated gear, 14.5 gpm | 1 |
| 17 | BAC-75-HYD-M16-CD | Motor, pressure plated gear, 14.5 gpm, case drain (optional) | 1 |
| 18 | 42701 | Washer, 3/8" | 2 |
| 19 | 41907 | Cap screw, 3/8" NC x 1", socket head | 2 |
| 20 | 41445 | O-ring, #10 SAE fitting | 2 |
| 21 | 41442 | Reverse check, #10 SAE male x 1/2" NPT female | 1 |
| 22 | 41446 | Body, adapter/restrictor, #10 SAE male x 1/2" NPT female | 1 |
| 23 | 41448 | O-ring, restrictor insert | 1 |
| 24 | 41447 | Restrictor orifice insert, .125 | 1 |
Repair Kits
| Kit No. | Description |
|---|---|
| RK-FMCSC-650 | Repair Kit Assembly |
| RK-BAC-75-M | Repair Kit Assembly, M Series, Eff. 6/15 |
This model has the silicon carbide shaft seal — use the silicon carbide seal and repair kit shown.
Parts per Ace Pump Corporation product sheet FMC-650F-HYD / FMC-650FS-HYD (rev 12/16). Not sure which part you need? Send a photo of the pump tag to sales@spraycenter.com or call (509) 838-2209.